Sometimes your washing machines just don’t get it. They might work well in other situations, but when it comes to laundry, they struggle mightily. You know that first wash they do a bit better, but after a while, the results fall back to when you first switched them on.
It seems like every time you turn around there’s another brand fighting over your money with the promise of a ‘broken washer repair’ advertisement campaign. If a washing machine is working efficiently, it should produce clean clothes more regularly than not. The best way to make sure this doesn’t happen is to follow these simple steps:
1. Check the Hoses and Cables first
The first step to a broken washer repair in Saskatoon or any other locationis checking the hoses and cables. Do this while the machine is running to be sure there aren’t any gross misalignments. Make sure the hoses are connected properly — especially the ones leading to the drums and the machine itself. If the hoses are connected in the wrong way, you might end up with a water leak and a reduced performance machine.
2. Turn Down the Heat
Once you’ve verified the hoses and cables are in the correct order, turn down the temperature on the machines to improve their efficiency. This doesn’t mean turning off the water, just reducing the heat from the machine to the water as much as possible. There are many types of washing machines, and each one has a different optimal temperature range. You can try lowering the temperature in your particular model to see what works best for you.
Washing machines come with a variety of sensors to help determine when it’s time to empty the bins. These sensors are usually located in the door of the machine and might be programmed to open the door when the load is low enough to warrant it. Some machines have an internal timer that will shut the machine off automatically when the clothes are done.
3. Change the Washing Machine Oil
Once the sensors are set, it’s time to change the washing machine oil as directed on the manufacturer’s oil change schedule. Make sure the machine isn’t running when you do this to avoid damaging the machine.
The oil should be changed at least once a month, maybe twice if you’re careful. If you’re using a top-quality oil, it should last you a long time. It’s easy to over-oil your machine, so use the right oil for your machine and your machine type.
4. Don’t Use Temperatures Over 33C
Washing machines should be allowed to run as hot as possible, but not hotter than 32C (90F). This is the optimal temperature for the highest quality wash and is what causes the most damage to the clothes. Overheating the clothes can shorten their life and make them smell bad.
Not only that, but excessively hot washes can damage the fabric and make the color run. If you have to run the machine at a higher temperature to get it to complete a cycle, just lower it to the point where it does the job, but don’t go over the temperature recommended above.
5. Don’t neglect the soil
The soil in your machine might be damaged. This is the part that gets overlooked on many repair jobs — the soil. The soil in your machine is what gives your clothes the boost they need to be clean. If you’re not taking the time to replenish the soil in your machine, then your machine is struggling to get to full capacity.
Stronger fibers are produced when there’s less soil, so stronger fibers need to be processed more often to get to the final product. If you’re not removing the soil from your machine, then you’re not getting the most out of it.
Broken washing machines are a common problem, and there are many different ways to go about solving it. When it comes to fixing a broken washing machine, don’t just rely on your machine’s sensors to tell you when it’s time to empty the baskets. You should also pay attention to the outside signs of wear and tear. A dirty machine is as much a symptom of a broken washing machine as a failure to produce clean clothes is a symptom of a bad business.