Magnavox is intended to control almost all TV brands available nowadays. Magnavox tv comes with a remote control but in case if it got misplaced. Then you can use a universal remote control to operate your Magnavox TV. There are codes given specified with the brands to program your universal remote with the Magnavox TV. Here is everything you need to know https://myuniversalremotecodes.com/magnavox-tv-remote-codes/.
Magnavox Remote codes with brands
| Brand Name | Magnavox Remote Codes |
| Celera | 0037 |
| Daewoo | 0041, 0127 |
| Dynex | 0042, 0094, 0002 |
| Dell | 0119 |
| Admiral | 0129, 0130 |
| Emerson | 0070, 0130,0059, 0041, 0127, 0114, 0040, 0038, 0091 |
| Gateway | 0116 |
| Haier | 0010, 0079, 0078 |
| Hisense | 0097, 0016, 0133, 0069 |
| Infinity | 0123 |
| LG | 0122, 0038, 0026, 0017, 0124, 0027, 0021, 0103 |
| Magnavox | 0040, 0126, 0116, 0091, 0058, 0115, 0110, 0044, 0086, 0018, 0123 |
| Mitsubishi | 0038, 0128, 0131, 0129 |
| NetTV | 0116 |
| Panasonic | 0126, 0007, 0106, 0105, 0053, 0109 |
| Philips | 0086, 0077, 0019, 0115, 0110, 0018, 0123 |
| Samsung | 0047, 0038, 0033, 0031, 0132, 0102, 0095, 0032, 0034 |
| Sony | 0029, 0030, 0101, 0043 |
| Curtis Mathes | 0129, 0127, 0123, 0039, 0132, 0100, 0034, 0041 |
| Brand Name | Magnavox Remote Codes |
| Advent | 0036 |
| Apex Digital | 0020, 0133, 0049, 0037 |
| Citizen | 0090, 0132 |
| Denon | 0039 |
| Electro band | 0043 |
| Element | 0001, 0073, 0088 |
| Emprex | 0060 |
| GoldStar | 0124 |
| Hallmark | 0038 |
| Hitachi | 0039, 0111 |
| Insignia | 0074, 0039, 0130, 0091, 0120, 0103, 0089, 0094, 0040 |
| Maxent | 0116 |
| Megatron | 0039, 0038 |
| Motorola | 0129 |
| Nexus Electronics | 0001 |
| MTC | 0132 |
| Orion | 0042, 0130 |
| Olevia | 0050, 0055, 0113 |
| Optonica | 0129 |
Programming of Magnavox universal remote with keycode method
- Turn ON the device
- Press the TV button on the remote
- Press and hold the SETUP button on the remote light flash that appears on it.
- Enter the keycode that you have chosen from the code list.
- Press and hold the power button while pointing the remote at the TV.
- When the screen switches OFF release the POWER button.
By following the above steps, you would easily program your Magnavox TV with your remote control. If the device is still not operating with the remote, choose another code from the list and repeat the same procedure.
Programming of Magnavox Universal Remote with Code search
Sometimes you couldn’t find the correct code for the device. In that case, you can switch the universal remote control to search mode. The universal remote will find the correct code for you by itself. Then you will use this code to program your remote with your TV.
- Turn the device ON.
- Enter the 3 digit code (9-9-1).
- Hold the POWER button and press the Channel up button until the TV turns off.
By following the above steps you can easily program your universal remote. But it is necessary to find the key code, it can take some time but will end up programming your device correctly. It is very easy to get your remote work by just following simple steps. Once you get the correct code, you are good to program your universal remote with Magnavox TV.