Specs and Installation of LED pot lights

Pot lights are tiny light fixtures for smaller indoor spaces. These lights are quite efficient and tangible for various lighting layouts. Previously, these lights made use of halogen lamps for extra brightness but now they are effectively replaced with LED lamps. LED pot lights are an unconventional approach to modern lighting, but they are becoming increasingly popular in new and refurbished homes.

The light from the LED pot lights shines downwards from within the ceiling. All ceiling light fixtures are used for both general illumination and aesthetic purposes. LED pot lights are also classified as decorative light fixtures because they not only illuminate the room but also improve the mood with their high-quality lighting.

Specifics of LED pot lights

The basic function of LED pot lights is entirely dependent on three basic parts of the fixture. These parts not just serve as a durable structure but also directs the light coming out of the fixture. To learn better about the actualities of recessed lighting, head over to this page.

The three main parts of a pot light fixture are:

1.  Housing

The housing of pot lights is the most important element since it holds all of the electrical components. In most situations, the housing of LED pot lights is located within the ceiling and is linked to joists, but in other cases, the housing of LED pot lights is available in a range of specifications that are classified as IC rated and non IC rated. Additional specifications are depending on the ceiling design, such as:

  • Sloped ceiling housing

This style of building is best suited for postmodern residences with unusual ceiling designs. It’s made to fit into technical locations where hanging light fixtures would take up too much room.

  • New construction housing

New construction housing refers to newly constructed homes with ceilings that support recessed lighting and ceiling joists that are incorporated into the ceiling for easy access.

  • Remodel housings

Remodel housings are for ceilings with difficult-to-find joists; most retrofit kits are available for such instances.

Because these lights reside inside the ceiling, they require a sufficient outlet for heat dissipation, thus the housing is rated accordingly. To avoid any mishaps, it is important to double-check these requirements.

2.  Bulb

The bulb used in the fixture determines the fate of the fixture. It determines the amount of lumens leaving the fixture. Higher quality bulbs means higher quality of lighting. Traditionally, halogen lamps have been of top priority as they are brighter than other counterparts but ever since the introduction of LED lamps they are quite in the end game.

LED lamps address all concerns of lighting and enhance the lighting as well as provide other on hand benefits like low energy consumption, directional lighting etc.

3.  Trim

The trims are for three lighting layers, all of which are necessary for high-quality, consistent illumination. Recessed lights are used as aesthetic light fixtures because of their experimentation value. The trim directs light from the fixture, which may be adjusted to fit any lighting scheme in the house.

The layout, for example, varies throughout the home. Ambient lighting is required for lounging activities in the living room, while bedrooms require ambient lighting for comfort, and kitchens require task lighting for an efficient working environment that is comfortable enough for dinner with family.

Since it’s the outermost part of the light it controls the amount of light leaving the fixture. The trim is essentially available in different designs for different lighting layouts which are as follows:

  • For general lighting
  • Open trim
  • Baffle trim
  • Reflector trim

These trim designs do not control the amount of light, instead amplify it for general lighting patterns.

  • For decorative lighting
  • Gimbal trim
  • Pinhole trim
  • Eyeball trim

Decorative trims control the light coming from the fixture and directs it in a desirable direction. These are adjustable for convenience.

Advantages of using LED pot lights

There are several advantages of using LED pot lights over using conventional lighting in modern spaces which are:

–      Allow more overhead space

LED pot lights allow a lot of overhead space in smaller rooms or places with ceiling heights around 8 feet or above. They fill the room with extra bright light without taking up any visual space like other fixtures which usually suspend from the ceiling. This makes the room appear bigger and more accommodating.

  • Pairable with other fixtures

These lights are highly effective as a stand alone fixture and while also being pairable with other decorative light fixtures like pendants and sconces.

  • Produce more lumens

LED pot lights produce more light. The brightness of each lamp is measured in lumens which are relatively brighter than traditional lamps.

  • Use less energy

LED pot lights require less energy to function and they also operate on cut down voltage for accent lighting. They are also super low maintenance and last for several years which rids the owners of frequent maintenance.

Leave a Comment